View LPP-100-12_4407452.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

100W Single Output with PFC Function
Features :
LPP-100
series
Universal AC input / Full range Built-in active PFC function Protections:Short circuit/Over load/Over voltage Cooling by free air convection 100% full load burn-in test Fixed switching frequency at PFC:67KHz PWM:134KHz 3 years warranty
SPECIFICATION
MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) LPP-100-3.3 LPP-100-5 3.3V 20A 0 ~ 20A 66W 5V 20A 0 ~ 20A 100W 100mVp-p LPP-100-7.5 LPP-100-12 LPP-100-13.5 LPP-100-15 LPP-100-24 LPP-100-27 LPP-100-48 7.5V 13.5A 0 ~ 13.3A 101.25W 100mVp-p 12V 8.5A 0 ~ 8.5A 102W 100mVp-p 13.5V 7.5A 0 ~ 7.5A 101.25W 100mVp-p 15V 6.7A 0 ~ 6.7A 100.5W 100mVp-p 24V 4.2A 0 ~ 4.2A 100.8W 150mVp-p 27V 3.8A 0 ~ 3.8A 102.6W 150mVp-p 48V 2.1A 0 ~ 2.1A 100.8W 250mVp-p
RIPPLE & NOISE (max.) Note.2 100mVp-p
3.14 ~ 3.63V 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 2.0% 2.0% 0.5% 1.0% 28ms/230VAC 0.5% 1.0%
7.13 ~ 8.25V 11.4 ~ 13.2V 12.8 ~ 14.9V 14.3 ~ 16.5V 22.8 ~ 26.4V 25.7 ~ 29.7V 45.6 ~ 52.8V 2.0% 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% 0.5% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5%
600ms, 30ms/230VAC
1200ms, 30ms/115VAC at full load
28ms/115VAC at full load 120 ~ 370VDC PF>0.98/115VAC at full load 76% 79% 79% 80% 83% 83% 83% 0.75A/230VAC
VOLTAGE RANGE Note.5 85 ~ 264VAC 47 ~ 63Hz FREQUENCY RANGE POWER FACTOR (Typ.) INPUT EFFICIENCY(Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVER LOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC
(Note 4)
PF>0.95/230VAC 69% 1.7A/115VAC 75%
COLD START 30A/230VAC <2mA / 240VAC 105 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 3.8 ~ 4.45V 5.75 ~ 6.75V 8.6 ~ 10.1V 13.8 ~ 16.2V 15.5 ~ 18.2V 17.25 ~ 20.25V 27.6 ~ 32.4V 31 ~ 36.45V 55.2 ~ 64.8V Protection type : Shut down o/p voltage, re-power on to recover -10 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.05%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY MTBF Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A 224.3Khrs min. MIL-HDBK-217F (25 222*62*32mm (L*W*H) 0.51Kg; 24pcs/13.9Kg/1.76CUFT )
OTHERS
NOTE
DIMENSION PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Derating may be needed under low input voltages. Please check the derating curve for more details.
File Name:LPP-100-SPEC 2005-09-13
100W Single Output with PFC Function
Mechanical Specification
222 5 5 212
LPP-100
series
Unit:mm
CN2 1
62
52
CN1 5 4 3 2 1
F4A/250V +V ADJ.
8
43.5
AC Input Connector (CN1) : JST B5P-VH or equivalent
Pin No. 1 2,4 3 5 Assignment AC/L No Pin AC/N FG Mating Housing JST VHR or equivalent Terminal JST SVH-21T-P1.1 or equivalent
32
DC Output Connector (CN2) : JST B8P-VH or equivalent
Pin No. 1,2,3,4 5,6,7,8 Assignment -V +V Mating Housing JST VHR or equivalent Terminal JST SVH-21T-P1.1 or equivalent
Block Diagram
PFC fosc : 67KHz PWM fosc : 134KHz
PFC CIRCUIT POWER SWITCHING RECTIFIERS & FILTER COSTANT CURRENT LIMITING & DETECTION CIRCUIT O.V.P. +V -V
I/P
EMI FILTER & RECTIFIERS
FG
O.L.P.
PWM & PFC CONTROL
Derating Curve
Output Derating VS Input Voltage
100
Forced Air 3.3 ~ 7.5V With 18CFM (15cm) Forced Air
Convection 3.3V ~ 7.5V With NO FAN
100 90 80 70
80
60
LOAD (%)
40
LOAD (%)
12 ~ 48V With No FAN
60 50 40
20
-10
0
10
20
30
40
50
60
70
85
100
115
135
155
230
264
AMBIENT TEMPERATURE ( )
INPUT VOLTAGE (V) 60Hz
File Name:LPP-100-SPEC 2005-09-13
150W Single Output with PFC Function
Features :
LPP-150
series
Universal AC input / Full range Built-in active PFC function, PF>0.96 Protections:Short circuit/Over load/Over voltage Protections:Over temperature(option) Cooling by free air convection 100% full load burn-in test Fixed switching frequency at PFC:67KHz PWM:134KHz 3 years warranty
SPECIFICATION
MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE LPP-150-3.3 LPP-150-5 3.3V 30A 0 ~ 30A 99W 5V 30A 0 ~ 30A 150W 100mVp-p LPP-150-7.5 LPP-150-12 LPP-150-13.5 LPP-150-15 LPP-150-24 LPP-150-27 LPP-150-48 7.5V 20A 0 ~ 20A 150W 100mVp-p 12V 12.5A 0 ~ 12.5A 150W 100mVp-p 13.5V 11.2A 0 ~ 11.2A 151.2W 100mVp-p 15V 10A 0 ~ 10A 150W 100mVp-p 24V 6.3A 0 ~ 6.3A 150W 150mVp-p 27V 5.6A 0 ~ 5.6A 151.2W 150mVp-p 48V 3.2A 0 ~ 3.2A 153.6W 250mVp-p
RIPPLE & NOISE (max.) Note.2 100mVp-p
3.14 ~ 3.63V 4.75 ~ 5.5V VOLTAGE TOLERANCE Note.3 2.0% 2.0% LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR 0.5% 1.0% 0.5% 1.0%
7.13 ~ 8.25V 11.4 ~ 13.2V 12.8 ~ 14.9V 14.3 ~ 16.5V 22.8 ~ 26.4V 25.7 ~ 29.7V 45.6 ~ 52.8V 2.0% 2.0% 2.0% 2.0% 1.0% 1.0% 1.0% 0.5% 1.0% 0.5% 1.0% 0.5% 1.0% 0.5% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5%
600ms, 30ms at full load 30ms at full load 85 ~ 264VAC 47 ~ 63Hz PF 0.96/230VAC 66% 2.5A/115VAC 72% PF 0.98/115VAC at full load 76% 79% 80% 80% 83% 83% 83% 1.2A/230VAC 120 ~ 370VDC
INPUT
EFFICIENCY(Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVER LOAD
COLD START 40A/230VAC <3.5mA / 240VAC 105 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 3.63 ~ 4.45V 5.5 ~ 6.75V 8.25 ~ 10.1V 13.2 ~ 16.2V 14.85 ~ 18.2V 16.5~ 20.25V 26.4 ~ 32.4V 29.7 ~ 36.5V 52.8 ~ 64.8V Protection type : Shut down o/p voltage, re-power on to recover -10 ~ +60 with cooling FAN(Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.05%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE EMC
(Note 4)
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY MTBF Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, Light industry level, criteria A 191.8Khrs min. MIL-HDBK-217F (25 222*75*41mm (L*W*H) 0.62Kg; 24pcs/16.6Kg/1.39CUFT )
OTHERS
NOTE
DIMENSION PACKING
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.
File Name:LPP-150-SPEC 2006-10-18
150W Single Output with PFC Function
Mechanical Specification
222 5 212
LPP-150
series
Unit:mm
5
CN1 5 4 3 2 1
FG
1
CN2
75
65
AC FUSE F5A/250V
12
+V ADJ.
43.8
AC Input Connector (CN1) : JST B5P-VH or equivalent
Pin No. 1 2,4 3 5 Assignment AC/L No Pin AC/N FG Mating Housing JST VHR or equivalent Terminal JST SVH-21T-P1.1 or equivalent
41
DC Output Connector (CN2) : JST B6P-VH*2 or equivalent
Pin No. 1~6 7~12 Assignment -V +V Mating Housing JST VHR or equivalent Terminal JST SVH-21T-P1.1 or equivalent
Block Diagram
POWER SWITCHING RECTIFIERS & FILTER
PFC fosc : 67KHz PWM fosc : 134KHz
PFC CIRCUIT +V -V COSTANT CURRENT LIMITING & DETECTION CIRCUIT O.V.P.
I/P
EMI FILTER & RECTIFIERS
FG ACTIVE START CIRCUIT
O.L.P.
PWM & PFC CONTROL
Derating Curve
Output Derating VS Input Voltage
100
With 18CFM FAN
100 90
80
80 70
60
LOAD (%)
40
LOAD (%)
50 60 70 (HORIZONTAL)
With NO FAN 3.3V ~ 7.5V Under 100VAC With No FAN Must derating to 60% load
60 50 40
20
-10
0
10
20
30
40
85
100
115
135
155
230
264
AMBIENT TEMPERATURE ( )
INPUT VOLTAGE (V) 60Hz
File Name:LPP-150-SPEC 2006-10-18

▲Up To Search▲

Price & Availability of LPP-100-12

	To Download LPP-100-12 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .